AB7000HF Series EMI Absorber
Intended to reduce EMI and RF noise in electronic systems, 3M™ EMI Absorber AB7000HF consists of a flexible polymer resin loaded with soft metal flakes. It can be easily die-cut into complex shapes and has multiple backing thickness. It features a one-sided acrylic pressure-sensitive adhesive and can be applied to noisy traces, IC's and reflective surfaces in an enclosure.
Features
- Flexible, high permeability magnetic film
- Frequency range 50 MHz - 3 GHz, target frequency 1 GHz - 2 GHz
- Acrylic pressure-sensitive adhesive (PSA) for easy application
- Low Halogen (less than 1500 ppm total bromine and chlorine)
- Easily die cut into complex shapes
- Meets guidelines set forth in IEC 61249-2-21
Applications
- Reduce radiating EMI noise by being attached on top of electronic components (e.g. a semiconductor chip)
- Reduce reflected EMI noise by being attached inside a shield can and/or compartment
- Reduce EMI noise by being wrapped or attached on a cable
- Diminish emitting EMI noise being induced by high frequency current on a metal surface
Contact your local sales office or email [email protected] for more information.