Desco Mini Monitor
Features:
- Single Workstation Continuous Monitor - Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
- NEW Illuminated Enclosure¹ - Makes the status of the operator and worksurface highly visible to the operator and supervisor
- IMPROVED Continuous Visual and Audible Alarms - Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
- NEW Park Delay Timer and ParkSnap™ - Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
- NEW Mat Monitor Switch - Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
- NEW Audible Alarm Adjustment- Sets the audible alarm volume from loud to louder
- Wave Distortion Technology - Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground² and the presence of its 1 megohm safety resistor
- Threaded Worksurface Grounding and Mounting - Grounds and monitors the worksurface with no additional wire
- Single-Wire Impedance Design - Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 Volt Operator Test Voltage - Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 Millisecond Alarm Response Time - Identifies failures and intermittencies that inferior technologies miss
- Desco 19344 Ring Magnets - Mounts the monitor in areas without a worksurface
- Calibration Verification - Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
- NIST Calibrated - Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
- 100-240VAC Safety Certified Power Adapter with North American Plug - Works with standard electrical systems in North America, Japan, and Asia
- Made in the United States of America
Contact your local sales office or email [email protected] for more information.